Indicator: It is a mounting adornment with a Namur mounting which is standard
for every pneumatic administrator.
Pinion: Pinion offers maximal wear protection from the valve. It is made of acclimated
combination steel and is plated with 15um nickel to decrease grating.
Actuator Body: It is made of anodized aluminium¢ launch
of which gives assurance against erosion and diminish the cylinder
grating.
End Caps: These tops offers most extreme
opposition against embryonic destructive components
Cylinders: The aluminium cylinders are moulded¢ with
astounding rings and aides. The cylinder plan and the twin rack build up a
nonstop torque on all administrators.
Travel Adjustment:
There are two outside alteration rushes
in the actuator that offers a standard change of 5 degrees in both open and
shut positions.
Elite springs: The preloaded high pliable steel springs provide long
administrations with the erosion safe Epoxy covered on it.
Bearing and aides: This gives a long life to the¢ actuator
by offering least erosion.
O-rings: These rings are for execution of¢
inconvenience free activity at standard temperature ranges.
Item
Details:
- ·
On/OFF Indicator
- ·
NAMUR Standard Solenoid Valve
in all Standard Coil Voltage
- ·
I/P Transducer (Convertor)
- ·
Pneumatic valve positioner
- ·
Electro-Pneumatic valve
positioner
- ·
Declutchable Manual Over - ride
- ·
Point of confinement Switches
for On/Off Indication at Panel board
- ·
Channel + Regulator Combination
with Pressure Gauge
- ·
Sealed area Valve
CONTACT
US:
Office
Address:
CONCORDE VALVES AND AUTOMATIONS 81/83, J.K.
Chambers, 2nd Floor, Office No.13, Nagdevi Street, Mumbai 400 003.
Call
US : 022 23403456 / 49710489
EMAIL-ID:
Visit:
Very interesting
ReplyDelete👍
ReplyDeleteQuite informative
ReplyDelete